Simple operation
You use the built-in timer to set the steaming time — after that the steam generator switches off automatically.
Hay Steamer
HAY STEAMER (excl. Container)
The compact solution for fitting to your own container. Hygienised hay all year round – fast, efficient and easy to use.
- Steam output
- —kg/h
- Pressure max.
- —bar(g)
- Heating output
- —kW
Available for purchase / leasing only
Technical data
The HAY STEAMER is available only in the 18 kW output class with a 32 A CEE connection. If you have a lower connected load available, please do get in touch — we can also supply the unit in a throttled version. Please note that a lower output class may extend the steaming time required.
HAY STEAMER (excl. Container) active - Steam output 24.0 kg/h
- Pressure max. 3.0 bar(g)
- Heating output 18 kW
HAY STEAMER (excl. Container) active
- Steam output 24.0 kg/h
- Pressure max. 3.0 bar(g)
- Heating output 18 kW
Performance
- Steam output(kg/h)
- 24.0
- Working pressure min.(bar(g))
- 1.0
- Working pressure max.(bar(g))
- 3.0
- Max. operating pressure(bar(g))
- 3.8
- Max. steam temperature(°C)
- 144
Electrical ratings
- Operating voltage(V)
- 400
- Frequency(Hz)
- 50
- Phases
- 3+PE
- Heating output(kW)
- 18.0
- Number of heating elements
- 4 × 4,5 kW
- Total connected load(kW)
- 18.5
- Total control voltage(V DC)
- 24
- Total rated current(A)
- 27
- Fusing (site-supplied)(A)
- 32
- Connector plug
- CEE 32A
Dimensions
- Width(mm)
- 533
- Height(mm)
- 1,104
- Length(mm)
- 1,309
Water consumption
- Steam generator
- max. 24 litres / hr
- Regeneration process, softening system
- 60 litres after 20 operating hours
Power consumption
- Maximum
- 18.5 kW/hr
Our Hay Steamer in operation
Thought through down to the last detail
Proven steam and heating technology under a robust, insulated stainless steel hood. Tap a function on the unit and the matching detail is zoomed in alongside it.
Controls & technology
High durability
The integrated water softening prevents limescale deposits in the generator, pipework and steam lances — even with hard tap water.
Insulated cladding hood
The steam generator and softening system sit under an insulated stainless steel hood — protected from cold and weather, for year-round operation.
Interior & steam lances
4 steam lances
Four separately switchable steam lances steam even larger square bales evenly.
Lances with striking face
The striking face on the lance head makes it easier to push them into densely pressed bales. A soft-faced mallet is included.
Frequently asked questions about the DINO HAY STEAMER
Which type of forage is steaming suitable for?
With the DINO HAY STEAMER you can steam both hay and straw effectively.
What water quality should be used?
The DINO HAY STEAMER has an integrated water softening system. You can therefore connect the unit to your drinking water supply without any problem. We advise against using well water or similar.
What do I need in place to use the DINO HAY STEAMER on my yard?
The DINO HAY STEAMER only needs a fresh water supply (a connection to your mains water) and a three-phase power connection with a connected load of 19 kW. That corresponds to a CEE 32A plug.
Can I also connect the DINO HAY STEAMER via a CEE 16A plug?
Yes, that is possible. We are happy to configure the unit for a lower connected load. Under those conditions, however, using 4 steam lances at the same time can no longer be guaranteed, or the steaming time increases.
Can the DINO HAY STEAMER also stand outdoors during the winter months?
Yes, the unit has an integrated frost monitor. This ensures that no frost damage occurs to the unit.
Non-binding consultation on DINO HAY STEAMER (excl. Container)
Our specialists in Bremen configure the system to match your requirements and advise you on the accessories you need.